Any one Knows about SCADA HMI Programming

Electronics & Electrical Engineering Topics

Any one Knows about SCADA HMI Programming

Postby Kriz » Sat Aug 20, 2011 4:34 pm

Is there any one , who knows about SCADA HMI Programming?
User avatar
Kriz
 
Posts: 6
Joined: Sat Aug 20, 2011 4:19 pm
Cash on hand: 356.40

Invitations sent: 0
Registered friends: 0
Reputation point: 0
Lance Corporal

Re: Any one Knows about SCADA HMI Programming

Postby Neo » Sat Aug 20, 2011 5:16 pm

Several years back I myself involved with few SCADA (Supervisory Control And Data Acquisition) projects. I was involved in HMI (Human-Machine Interface), Supervisory software and RTU (Remote Terminal Units). We used touch screen displays, etc.. The last SCADA project I contributed with VHDL programming was to replace a set of PLSs with FPGAs on a massive mechanical machine.

I mostly involved with programming on both PC and devices where as my uncle (the best electronic engineer I knew in Sri Lanka who can work without any fear but unfortunately he passed away several months ago :cry: ) did the electronic integration. If you can describe your requirement, I might be able to help you in programming & designing perspective of the system. Just clarify what you are going to do.
User avatar
Neo
Site Admin
Site Admin
 
Posts: 2613
Joined: Tue Jul 14, 2009 8:37 pm
Cash on hand: 221,227.50
Bank: 15,536,454.00
Location: Colombo/London
Medals: 2
EC_Bronze_Star (1) EC_Achievment (1)

Invitations sent: 94
Registered friends: 12
Highscores: 13
Reputation point: 74
Lieutenant

Re: Any one Knows about SCADA HMI Programming

Postby Kriz » Fri Jul 25, 2014 11:13 am

Thank you! for your information.first I want to know what are the tools which use for Programming HMI , is there any special tools ?.
:?:
User avatar
Kriz
 
Posts: 6
Joined: Sat Aug 20, 2011 4:19 pm
Cash on hand: 356.40

Invitations sent: 0
Registered friends: 0
Reputation point: 0
Lance Corporal

Re: Any one Knows about SCADA HMI Programming

Postby Neo » Mon Jul 28, 2014 8:14 pm

You need to decide your tools. You can use microcontrollers, LCD display with touch control, etc... It is all about designing your system properly to address the machine you are going to control.
User avatar
Neo
Site Admin
Site Admin
 
Posts: 2613
Joined: Tue Jul 14, 2009 8:37 pm
Cash on hand: 221,227.50
Bank: 15,536,454.00
Location: Colombo/London
Medals: 2
EC_Bronze_Star (1) EC_Achievment (1)

Invitations sent: 94
Registered friends: 12
Highscores: 13
Reputation point: 74
Lieutenant


Return to Electronics & Electrical Engineering

Who is online

Users browsing this forum: No registered users and 3 guests