Update Online Database using GSM/GPRS Shield

Microcontroller, DSP and FPGA Topics

Update Online Database using GSM/GPRS Shield

Postby lakindu93 » Sun Jul 13, 2014 4:46 pm

මේ තියෙන EFCom GPRS/GSM Shield එක පාවිච්චි කරලා online database එකකට data insert වෙන විදිහට හදාගන්නේ කොහොමද?
User avatar
lakindu93
 
Posts: 21
Joined: Wed Jun 26, 2013 7:15 am
Cash on hand: 716.20
Location: Colombo

Invitations sent: 0
Registered friends: 0
Reputation point: 0
Lance Corporal

Re: Update Online Database using GSM/GPRS Shield

Postby lakindu93 » Mon Jul 14, 2014 10:54 pm

reply soon....
User avatar
lakindu93
 
Posts: 21
Joined: Wed Jun 26, 2013 7:15 am
Cash on hand: 716.20
Location: Colombo

Invitations sent: 0
Registered friends: 0
Reputation point: 0
Lance Corporal

Re: Update Online Database using GSM/GPRS Shield

Postby Neo » Sun Jul 20, 2014 4:51 am

First you need to study the AT command sequence required to connect to a url and submit data. Then you need write a server side code on your web server to intercept those calls and store data to your database.

You need to contact your seller and ask him to provide you the AT command reference manual for the chip/module you have bought.

If your chip/module is listed here, you may contact Aptinex to help you out.

Good luck!
User avatar
Neo
Site Admin
Site Admin
 
Posts: 2612
Joined: Tue Jul 14, 2009 8:37 pm
Cash on hand: 221,202.10
Bank: 15,536,454.00
Location: Colombo/London
Medals: 2
EC_Bronze_Star (1) EC_Achievment (1)

Invitations sent: 94
Registered friends: 12
Highscores: 13
Reputation point: 74
Lieutenant

Re: Update Online Database using GSM/GPRS Shield

Postby Neo » Sun Jul 20, 2014 6:49 am

Found the right source for you. Have a look at following link.
http://www.elecfreaks.com/wiki/index.php?title=EFCom_GPRS/GSM_Shield

You can find SIM900_AT Command Manual_V1.03 at the end of the page under References. That's all need to get you started.
User avatar
Neo
Site Admin
Site Admin
 
Posts: 2612
Joined: Tue Jul 14, 2009 8:37 pm
Cash on hand: 221,202.10
Bank: 15,536,454.00
Location: Colombo/London
Medals: 2
EC_Bronze_Star (1) EC_Achievment (1)

Invitations sent: 94
Registered friends: 12
Highscores: 13
Reputation point: 74
Lieutenant

Re: Update Online Database using GSM/GPRS Shield

Postby lakindu93 » Mon Jul 21, 2014 3:56 pm

Neo wrote:First you need to study the AT command sequence required to connect to a url and submit data. Then you need write a server side code on your web server to intercept those calls and store data to your database.

You need to contact your seller and ask him to provide you the AT command reference manual for the chip/module you have bought.

If your chip/module is listed here, you may contact Aptinex to help you out.

Good luck!



thanks for your Reply...
User avatar
lakindu93
 
Posts: 21
Joined: Wed Jun 26, 2013 7:15 am
Cash on hand: 716.20
Location: Colombo

Invitations sent: 0
Registered friends: 0
Reputation point: 0
Lance Corporal

Re: Update Online Database using GSM/GPRS Shield

Postby lakindu93 » Mon Jul 21, 2014 3:57 pm

Neo wrote:Found the right source for you. Have a look at following link.
http://www.elecfreaks.com/wiki/index.php?title=EFCom_GPRS/GSM_Shield

You can find SIM900_AT Command Manual_V1.03 at the end of the page under References. That's all need to get you started.


yes... we are going to use this module...
User avatar
lakindu93
 
Posts: 21
Joined: Wed Jun 26, 2013 7:15 am
Cash on hand: 716.20
Location: Colombo

Invitations sent: 0
Registered friends: 0
Reputation point: 0
Lance Corporal

Re: Update Online Database using GSM/GPRS Shield

Postby lakindu93 » Mon Jul 21, 2014 4:54 pm

are there any tutorials about AT commands to connect a url and submit data ?
User avatar
lakindu93
 
Posts: 21
Joined: Wed Jun 26, 2013 7:15 am
Cash on hand: 716.20
Location: Colombo

Invitations sent: 0
Registered friends: 0
Reputation point: 0
Lance Corporal

Re: Update Online Database using GSM/GPRS Shield

Postby Neo » Mon Jul 21, 2014 7:43 pm

are there any tutorials about AT commands to connect a url and submit data ?

Have a look at section "7 AT Commands for GPRS Support" in the AT commands manual. You can also follow the links below if you are using an Arduino.

viewtopic.php?f=18&t=4350

viewtopic.php?f=18&t=4348

viewtopic.php?f=18&t=4349
User avatar
Neo
Site Admin
Site Admin
 
Posts: 2612
Joined: Tue Jul 14, 2009 8:37 pm
Cash on hand: 221,202.10
Bank: 15,536,454.00
Location: Colombo/London
Medals: 2
EC_Bronze_Star (1) EC_Achievment (1)

Invitations sent: 94
Registered friends: 12
Highscores: 13
Reputation point: 74
Lieutenant

Re: Update Online Database using GSM/GPRS Shield

Postby lakindu93 » Tue Jul 22, 2014 12:44 pm

Neo wrote:
are there any tutorials about AT commands to connect a url and submit data ?

Have a look at section "7 AT Commands for GPRS Support" in the AT commands manual. You can also follow the links below if you are using an Arduino.

viewtopic.php?f=18&t=4350

viewtopic.php?f=18&t=4348

viewtopic.php?f=18&t=4349



thanks lot... I will see
User avatar
lakindu93
 
Posts: 21
Joined: Wed Jun 26, 2013 7:15 am
Cash on hand: 716.20
Location: Colombo

Invitations sent: 0
Registered friends: 0
Reputation point: 0
Lance Corporal

Re: Update Online Database using GSM/GPRS Shield

Postby lakindu93 » Sun Aug 31, 2014 5:56 am

Any one know about how to get the GSM BTS location using AT Commands....(like cell info display in mobile phones)
I'm using SIM900 Efcom GSM/GPRS Shield..
User avatar
lakindu93
 
Posts: 21
Joined: Wed Jun 26, 2013 7:15 am
Cash on hand: 716.20
Location: Colombo

Invitations sent: 0
Registered friends: 0
Reputation point: 0
Lance Corporal

Next

Return to Embedded Processors & Programming

Who is online

Users browsing this forum: No registered users and 3 guests

cron