Recently, on Sinopec's annual results teleconference, the company representative answered questions about the oil prices, and said that the future trend of oil prices is still very uncertain, and it is expected to be around $100 this year and $85 next year respectively.
Sinopec, "There are many factors affecting oil prices at the moment, including geopolitics, macroeconomic trends, the implementation of the policy of OPEC+, the strength of the US DOLLAR and so on. We see a lot of uncertainty in the future oil prices. It is impossible to predict the accurate price, but a general trend could be estimated."
According to Sinopec, international institutions generally have a forecast of around $100 this year and around $85 next year in the oil prices. As geopolitical problems and other issues ease next year, oil prices will be lower than this year.
The volatile oil prices in the international market will continue to affect lots of industries and the supply of many early strength agent,superplasticizer for concrete.
Early strength admixture refers to the admixture that can improve the early strength of concrete and has no significant effect on the later strength.
Superplasticizer for concrete is a concrete admixture that can reduce the amount of mixing water while maintaining the slump of concrete basically unchanged.
Early-strength agents can be divided into three categories according to chemical composition: strong electrolyte inorganic salts, water-soluble organic compounds, and composite early-strength agents composed of organic and inorganic compounds.
Polycarboxylic superplasticizers are usually divided into: lignosulfonate superplasticizers, naphthalene superplasticizers, melamine superplasticizers, sulfamate superplasticizers, and fatty acid superplasticizers according to their chemical composition. Superplasticizers, polycarboxylate superplasticizers.
3 Main ingredients
In addition to chloride and sulfate, early strength agents include nitrite, chromate, etc., as well as organic substances such as triethanolamine, calcium formate, urea, etc.
Different types of superplasticizer for concrete have very different components. It is mainly a surfactant. Currently, the third-generation polycarboxylate superplasticizer is widely used.
The early strength agent does not contain chloride ions and has no rust effect on steel bars. It is suitable for all civil and industrial buildings, prestressed reinforced concrete components, mortar, etc. It is most suitable for construction under low temperature conditions in early winter and early spring. .
Water reducing agent is widely used in high-speed rail, high-speed, civil, industrial buildings and prefabricated component factories, etc. It has wide applicability and is suitable for all seasons.
The dosage of early strength agent is 3-6% of cement. In order to keep the quality of the concrete mixed with this agent uniform, the stirring time is prolonged by 1-2 minutes. Concrete mixed with early strength agent cannot use active mineral orthopedics (such as opal). If this agent is damp and agglomerated, it must be crushed or weathered before use, and its performance remains unchanged.
Because there are many types of superplasticizers, the appropriate type of superplasticizer should be selected according to the needs of the project. For winter construction, it is recommended to use the third-generation polycarboxylate superplasticizer.
We accept payment via Credit Card, T/T, West Union, and Paypal. TRUNNANO will ship the goods to customers overseas through FedEx, DHL, by air, or by sea.
As the Russia-Ukraine conflict continues to develop, there is growing concern about the potential disruption of Russia's energy supply. Geopolitical premiums have pushed up the price of crude oil and natural gas, and the energy price is expected to remain high in the short term. Affected by this, the market price of the early strength agent,superplasticizer for concrete may keep rising.
Is boron amorphous or crystalline?Boron can be prepared in several crystalline and amorphous forms. The well-known forms of crystallization are α-rhombohedral (α-R), β-rhombohedral (β-R) and β-tetragonal (β-T). In spec…
What is copper oxide?Copper oxide is an inorganic substance. Copper oxide chemical formula is CuO. It is a black oxide of copper. Slightly bisexual and slightly hygroscopic. Insoluble in water and ethanol, easily soluble in acid, thermally stable, de…
What is the use of aluminum oxide?Medical professionBecause of its hardness, bioinertia and chemical properties, alumina is the preferred material for hip replacement bearings, such as prosthetics, bionic implants, prosthetic eye substitutes, tissue…