TR75 7.5 kW CLC Foam Generator for Lightweight Concrete

U.S. natural gas futures rose about 5 percent to a near nine-week high as global energy prices surged on concerns over a pricing plan for energy exports, keeping U.S. LNG export demand near record highs. U.S. natural gas prices have risen despite forecasts of mild weather and lower-than-expected demand, which will allow utilities to fill up storage facilities next week. On Wednesday, Germany launched an emergency plan to manage gas supplies in Europe's largest economy. If natural gas supplies are interrupted or stopped, the German government could take unprecedented steps to limit electricity supply.
Affected by the increase in the price of natural gas, the price of the Concrete Foaming Generator will also increase.

Foam Concrete Machine is the core equipment of foam concrete production, which has a significant impact on the quality of foam concrete. An excellent foam generator for concrete not only has a high foam output but more importantly, the quality of the foam produced is outstanding. TR75 portable foam generator developed by our company. It can be used in laboratories, small-scale foam concrete cast-in-situ projects, and pilot lines of foam concrete products. The outstanding advantages of TR75 portable foam generator are low foam moisture content, more foaming agent, high foam uniformity, large foam output, and other benefits.

Parameters of TR75 CLC Foam Generator

Benefits of TR75 CLC Foam Generator:

(1) The foam produced is uniform, which helps improve the strength and thermal insulation performance of foam concrete. The foam is uniform, the foam is not easy to be broken in the slurry, the amount of foam is small, and a high closed cell ratio can be formed. The foam is evenly distributed in the mud, which can increase the strength of the foamed concrete;

(2) Low foam density. TR75 portable foam generator has low foam density and saves foaming agent. In the case of the same dilution factor of the foaming agent, the thickness of the foam produced by this machine is 20-40 g/L, and different foaming agents have various dilution factors;

(3) Simple operation, low failure rate, precision parts are selected to reduce the use of wearing pieces, the failure rate is lower, the service life is longer, and one-button control is realized.

Note:

(1) The foaming liquid suction pipe is about 1.5m long. Be careful not to remove the filter to prevent impurities from blocking the pump;

(2) Foaming volume: The maximum foaming volume is about 100L/min. The foaming agent used will affect the amount of foaming. The value of 100L/min is the value measured after the company's foaming agent is diluted 60 times;

(3) About making foam concrete: You can use a mixing bucket to make pulp, and then directly foam the foam on top of the slurry. After stirring, the slurry can be mixed with foam to form foam concrete. Take care to minimize the foam stirring time and stir at low speed.

At present, international supply chains were shocked, and logistics and transportation efficiency decreases. Geopolitical conflicts further aggravate uncertainties about the European and American economic recovery and the global commodity supply. For this reason, I assume the price of the Concrete Foaming Generator would not decrease significantly in the short term.

Inquiry us